TRIBOTAPE® 11 Anti-wear tapes - CSB® Plastic Bearing Technology

Product properties

● FDA grade

● Low coefficients of friction

● Available underwater

● Easy to cut

● Continuous working temperature: -20/+80℃

Standard products

TRIBOTAPE® 11 Anti-wear tapes

Part no.:

Thickness ±0.05 [mm]：

Width ±1 [mm]：

Adhesive thickness [mm]：

Standard length [m]：

*Lead time [wks]：

Shop now

Dimensions

▊Technical data

Material

Dry friction

coefficient

[u]

Max.

static load

[Mpa]

Max.

dynamic load

[Mpa]

Max. PV

[N/mm²xm/s]

Max. Speed [m/s]

Operation temperature* [℃]

Continuous

Intermittent

Long-term

Short-term

TRIBOTAPER®11

0.05-0.15

0.25

0.3

0.5

-20/+80

-50/+100

*Operation temperature of standard tape with adhesive back

Please contact us for the operation temperature of the tape without adhesive back

TRIBOTAPE® Anti-wear tapes

Type PDF

Size 207KB

Time 10-2023

No. CSB/CAT.062

download

202

Medium	TRIBOTAPE® 11 Chemical resistance
Alcohol	Resistant
Hydrocarbons	Resistant
Greases. oils	Resistant
Fuels	Conditionally resistant
Diluted acids	Resistant
Strong acids	Conditionally resistant
Diluted alkalis	Resistant
Strong alkalis	Conditionally resistant

▊ CSB® Bearing Material Chemical Resistance

Please select bearing material and medium...

▊CSB® bearing material chemical resistance data is a comparison test result of the CSB chemistry laboratory using laboratory specimens or similar chemicals at room temperature 23 ℃, without considering the impact of other temperatures and chemical medium mixtures on the chemical resistance of CSB® bearing materials ; Therefore, this data can only act as a reference. CSB® recommends that the chemical resistance of actual parts should be tested under application conditions and verify the suitability of the bearings.

+86-400-6633-096

Online Tools

Product News

Customer Services

CSB® More products

M80 Self-lubricating plastic rods

● Continuous working temperature: -40/+90℃

● Maintenance-free, self-lubricated

● Suitable for most application

● Suitable for medium and high load operation

M81 Self-lubricating plastic rods

● Continuous working temperature: -100/+80℃

● Maintenance-free, self-lubricated

● Low friction, anti-wear

● Impact resistance, low noise

EPB Self-lubricating plastic rods

● Continuous working temperature: -40/+80℃

● Maintenance-free, self-lubricated

● Special lubricant and wear resistant

● Low friction coefﬁcient

EPB5A Self-lubricating plastic rods

● Continuous working temperature: -100/+250℃

● Suitable for high load and lovo speed operation

● High load capacity at higher temperature

● Good chemical resistance

EPB6 Self-lubricating plastic rods

● Continuous working temperature: -40/+80℃

● Maintenance-free, self-lubricated

● Low friction coefﬁcient

● FDA grade

EPB10 Self-lubricating plastic rods

● Continuous working temperature: -100/+250℃

● Maintenance-free, self-lubricated

● Good wear resistance with long service life

● Good chemical resistance

EPB13 Self-lubricating plastic rods

● Continuous working temperature: -50/+90℃

● Maintenance-free dry operation

● Small wear off amount against various shaft materials

● Lower friction

MN70 Self-lubricating plastic rods

● Continuous working temperature: -40/+90℃

● Maintenance-free, self-lubricated

● Low friction coefﬁcient

● Long service time

MN71 Self-lubricating plastic rods

● Continuous working temperature: -40/+110℃

● Maintenance-free, self-lubricated

● Suitable for operation in dusty environment

● Suitable for working in humid environment

MN73 Self-lubricating plastic rods

● Continuous working temperature: -40/+110℃

● Maintenance-free dry operation

● Low friction coefﬁcient

● Suitable for working in humid environment

M80 Self-lubricating plastic plates

● Continuous working temperature: -40/+90℃

● Maintenance-free, self-lubricated

● Suitable for most application

● Suitable for medium and high load operation

M81 Self-lubricating plastic plates

● Continuous working temperature: -100/+80℃

● Maintenance-free, self-lubricated

● Low friction, anti-wear

● Impact resistance, low noise

EPB13 Self-lubricating plastic plates

● Continuous working temperature: -50/+90℃

● Maintenance-free dry operation

● Small wear off amount against various shaft materials

● Lower friction

MN71 Self-lubricating plastic plates

● Continuous working temperature: -40/+110℃

● Maintenance-free, self-lubricated

● Suitable for operation in dusty environment

● Suitable for working in humid environment

MN73 Self-lubricating plastic plates

● Continuous working temperature: -40/+110℃

● Maintenance-free dry operation

● Low friction coefﬁcient

● Suitable for working in humid environment