DURARUB® backing material is high strength glass fiber with epoxy resin and the lubricating layer is PTFE filament and high strength fiber. The special structure performs an outstanding anti-wear feature and low friction…
Polymer-tech SolutionsTM
● DURARUB® bearing material uses high-strength glass fiber-reinforced high-temperature epoxy resin as the load-bearing layer, and special fibers and PTFE fibers as the sliding layer. This enables the bearings to have excellent wear resistance and a very low friction coefficient under high-load and low-speed working conditions, and they can still exhibit good self-lubricating properties and high bearing load even without lubrication for a long time.
● High-performance wear-resistant materials serve as the sliding layer, combined with high-strength fiber-reinforced load-bearing layers; DURARUB® materials are suitable for applications with sustained high static and dynamic loads and relatively low sliding speeds. They are also applicable to applications where conventional lubrication is impossible or prohibited. DURARUB® materials enable zero-maintenance operation of machinery and equipment for customers.
DURARUB® backing material is high strength glass fiber with epoxy resin and the lubricating layer is PTFE filament and high strength fiber. The special structure performs an outstanding anti-wear feature and low friction…
High-performance wear-resistant materials serve as sliding layers combined with high-strength fiber-reinforced load-bearing layers; DURARUB® materials are suitable for applications with consistently high static and ...
● GE bearings have a composite outer ring with inner wear-resistant layer and hard chrome-plated steel balls inside
● Excellent sliding properties in seawater
● Working temperature -40/+130℃
▊DURARUB® Filament Wound Bearings Finder[V2.0] is based on the analysis and calculation of a large number of test data in CSB® laboratory. You can calculations material data by entering parameters such as bearing load, speed, and temperature, and finally output material adaptation data.
▊Because the system calculate and analyze based on lab data, it can't exactly meet the ractual use requirements absolutly. The system data verification has certain limitations; CSB® recommends that the bearing must be tested again to verify whether it meets the actual use requirements.
▊DURARUB® Filament Wound Bearings Finder output data information is only for design reference, and can not be used as the final standard for determining the bearing material conformity, If you have any questions, please contact CSB® sales engineers.
CSB® metal sliding bearings suitable for low-speed and heavy load, intermittent operation and swing condition...
DURAPLAS® self-lubricated plastic semi-finished products available service for the customer special requirement of uncommon bearings. It is possible for the mold cost saving and improves the delivery time...
DURAPLAS® Plastic plain bearings use high-performance plastics as the raw material, and filled high-strength fibers and special solid lubricants by the polymer compound technology to improve the anti-wear resistance...
DURAMOV® cable chains are made of high strength and anti-wear plastics, The cable chains are used in a variety of motion modes and strokes. DURAMOV® cable chains can carry FLEXMOV® flexible cables and energy hoses...