Product Features

● Sliding layer material: TEFPLAS® B

● Operation temperature ±200℃

● Max. continuous running speed 1.5m/s

● Maintenance-free, dry-running

● Fast assembly and light weight

● For TR linear guide rails

● Resistant dust

● Quiet operation

TRC01 Guide rail carriages-TPB

Part no.:

A [mm]：

A1±0.2 [mm]：

C±0.2 [mm]：

C1 [mm]：

H±0.2 [mm]：

H1 [mm]：

H2 [mm]：

K1 [mm]：

*Lead time [wks]：

Download CAD

Cart

Shopping

Dimensions

▊TRC01 Roller carriages load capacity

Part No.	Max. static load [N]		Static load [N·M]			Weight
Part No.	0°	90°	Mr	Mp	My	[g]
TRC01-09-TPB	4600	1300	18	34	10	9
TRC01-09-13-TPB	4600	1300	18	34	10	9
TRC01-12-TPB	7600	2300	38	65	20	15
TRC01-15-TPB	15000	3800	98	159	41	30

TR01 Low-profile linear guide rails

● Small installation width from 09 to 12 mm

● The dimensions are the same as the ball bearing guides

● Made of hard anodized surface of aluminum alloy

● Maintenance-free with TRC roller carragies

Details

▊Eccentric forces

● Maximum 2:1 ratio

● 1x = bearing separation on same shaft

● 2x = distance from shaft to load or force

CSB-LIN®直线轴承安装法则

● CAUTION: uneven motion or even system blockage will occur if the 2:1 ratio is exceeded !

This principle is NOT load dependent! It is NOT due to edge loading. It is also NOT dependent on the driving force used! The greater the distance between the drive and guide bearings, the higher the degree of wear and required drive force.

There may be other factors that add to the braking effect, but the coefficient of friction is the main cause.

● NOTE: The Rule(2:1) is based on the static friction value of 0.25 theoretically, However, Additional lubrication can help to drop friction and extend the 2:1 ratio.

● If you have any questions on design and/or assembly, please contact our application engineers.