CSB塑料轴承产品
banner
banner
banner
CSB塑料轴承产品05
CSB塑料轴承产品04
HR Linear guide rails

Product properties

● Aluminum alloy material, Hard anodized surface of sliding

● Maintenance-free linear slide guides providing virtually limitless design freedom 

● Lubrication-free and dirt-resistant 

● Weight saving and silent

● Simple installation, maintenance-free 

● Insensitivity to dirt through dry operation 

● Variable width can be fitted



HR01 Linear guide rails
HR01 Linear guide rails

● Small installation width from 15 to 23 mm

● The installation width and the holes are consistent with the standard ball guide rails

● Made of hard anodized surface of aluminum alloy

more
HRC01 Roller carriages, Standard
HRC01 Roller carriages, Standard

● Standard anti-wear carriages with clearance adjustment

● Very suitable for high speed applications, the speed up to 10m/s

● Max. long-term temperature: 90℃

more
HRC01 Roller carriages, High temperature
HRC01 Roller carriages, High temperature

● High temperature carriages with clearance adjustment

● Very suitable for high speed applications, the speed up to 10m/s

● Max. long-term temperature: 120℃

more
HRC01 Roller carriages, Very quiet
HRC01 Roller carriages, Very quiet

● Very quiet carriages with clearance adjustment

● Very suitable for high speed applications, the speed up to 10m/s

● Max. long-term temperature: 70℃

more

Eccentric forces

● Maximum 2:1 ratio

● 1x = bearing separation on same shaft 

● 2x = distance from shaft to load or force

CSB-LIN®直线轴承安装法则

● CAUTION: uneven motion or even system blockage will occur if the 2:1 ratio is exceeded !

This principle is NOT load dependent! It is NOT due to edge loading. It is also NOT dependent on the driving force used! The greater the distance between the drive and guide bearings, the higher the degree of wear and required drive force.

There may be other factors that add to the braking effect, but the coefficient of friction is the main cause.

● NOTE: The Rule(2:1) is based on the static friction value of 0.25 theoretically, However, Additional lubrication can help to drop friction and extend the 2:1 ratio.

● If you have any questions on design and/or assembly, please contact our application engineers.


CSB-LMS® HR Linear guide rails

Type PDF
Size 153KB
Time 12-2021
No. CSB/CAT.062E

+86-400-6633-096

Product News

Customer Services

Fast Services

CSB® More products
Precision shafts
Precision shafts

AS: Hard anodized aluminum shaft, the best shaft for LIN linear bearings; CS: Hard-chromed steel shaft, the effective-cost shaft; ES: 304 Stainless steel shaft, the best for chemical liquid; Shaft end processing service...

more
Supported shafts
Supported shafts

Compact and low high design support;

Standard design support;

3 materials shaft: Hard anodized aluminum shaft, Hardchromed steel shaft, 304 Stainless steel shaft;

more
NR Small linear guide rails
NR Small linear guide rails

Small installation height between 6 and 12 mm; 

Lightweight;

Numerous carriage options – also with pretension; 

Maintenance-free, self lubricating;

more
Lead screw drivers
Lead screw drivers

Efficient and durable CSB-LMS® high helix threads;

Self-locking trapezoidal standard threads;

Maintenance-free, dry operation;

Corrosion resistant、Resistant to dirt and Low-noise;

more
Linear drive modules
Linear drive modules

Standard design;

Various materials for shaft and lead screw; 

Maintenance-free and optionally corrosion resistant;

Temperature resistant up to +60 ℃;

more
Motors and controllers
Motors and controllers

This motor cable directly exit from the housing, They are suitable for installation in an extra housing or for the machine equipment in cleaning the environment; Stepper motor driver is based on PID current control...

more
Flexible jaw couplings
Flexible jaw couplings

The coupling connects the drive shaft of the axis to the Motor, An elastic polymer insert in the centre of the coupling transfers the motor torque, This damping element compensates for radial and axial clearance...

more