CSB塑料轴承产品
banner
banner
banner
CSB塑料轴承产品05
CSB塑料轴承产品04
DURAMOV® Plastic cable carriers

Product properties

DURAMOV® cable carriers are made of high strength and anti-wear plastics, The cable carriers are used in a variety of motion modes and strokes. DURAMOV® cable carriers can carry FLEXMOV® flexible cables and energy hoses, such as control cables, data cables, servo cables, motor cables, bus cables, robot cables, oil and gas hoses...


C01 Micro cable carriers
C01 Micro cable carriers

● Small pitch for low-noise, smooth running

● One-piece design, non-openable

● Very lightweight, low price smallest inner heights and bend radius

more
C11 Opening micro cable carriers
C11 Opening micro cable carriers

● Small pitch for low-noise, smooth running

● One-piece design, non-openable

● Very lightweight, low price smallest inner heights and bend radius

more
C21 Openable micro cable carriers
C21 Openable micro cable carriers

● Small pitch for low-noise, smooth running

● Two-pieces design, openable along the outer radius

● Very lightweight, low price smallest inner heights and bend radius 

more
C31 Openable micro cable carriers
C31 Openable micro cable carriers

● Small pitch for low-noise, smooth running

● Two-pieces design, Openable along the outer radius or inner radius

● Quick flange optional

more
C02 Universal cable carriers
C02 Universal cable carriers

● Easy assembly: Chain links openable along inner or outer radius from both sides

● High strength: large pin/bore and crossbar with high locking force 

more
C03 High load cable carriers
C03 High load cable carriers

● Attachment from any side with mounting brackets

● Long service life: lateral sliding surfaces design

● High strength and stable: due to undercut design, high fill weight available

more
C01E ESD micro cable carriers
C01E ESD micro cable carriers

● Electro-Static discharge, urface resistance <109Ω

● Small pitch for low-noise, smooth running

● One-piece design, non-openable

more
C21E ESD openable micro cable carriers
C21E ESD openable micro cable carriers

● Electro-Static discharge,Surface resistance <109Ω

● Small pitch for low-noise, smooth running

● Two-pieces design, openable along the outer radius

more
C31E ESD openable micro cable carriers
C31E ESD openable micro cable carriers

● Small pitch for low-noise, smooth running

● Two-pieces design, Openable along the outer radius or inner radius

● Quick flange optional

more
C02E ESD universal cable carriers
C02E ESD universal cable carriers

● Electro-Static discharge,Surface resistance <109Ω

● Easy assembly, Long service life

● High strength: large pin/bore and crossbar with high locking force 

more
C04 Quiet cable carriers
C04 Quiet cable carriers

● Elastic connection and small pitch for low-noise, smooth running 

● Crossbars removable along the inner and outer radius 

● Dynamic and quiet suitable for cleanroom applications

more
Guide troughs
Guide troughs

● very stable and rugged for heavy machinery 

● Two piece design, adjustable to the width according the cable chains

● Available in galvanised steel and stainless steel

more
Cable carrier accessories
Cable carrier accessories

DURAMOV® plastic cable carrier accessories including: stress relief unit and C-shaped bracket; vertical separator and horizontal separator ...

more
BL Bellows
BL Bellows

BL bellows is suitable for use in general mechanical applications, The good anti-freezing ability and self-extinguishing properties can be used in automotive industries. The bellows keep high impact resistance in ...

more

Application icons

CSB-PCC®拖链应用图标

Calculation of the chain length

The fixed end in the center of the travel is the most costeffective solution.

The chain length LK is calculated by using half the length of travel and adding the value K if the fi xed end of the chain is located in the center of the

travel, You can get the value K from the size table in every series chain. It is the most cost-effective solution if Placing the fi xed end in the center of

the travel, Because it requires the shortest chain, cables and hoses.

CSB-PCC®拖链长度计算

Camber

The largest possible unsupported length is influenced by the design, material and camber. Camber is the curve of the upper run along its unsupported length. All DURAMOV® chains are manufactured with camber. In the Installation dimensions section of each respective chain description, you will fi nd the measurement HF, which specifi es the necessary clearance height, taking the camber into account. The camber allows for longer unsupported lengths and increases service life and operating safety. Upon request, we can deliver chains without camber for restricted space applications - however, these no camber chains do not have the same load-bearing capacity.

CSB-PCC®拖链预应力

Unsupported applications

If the upper run of the chain operates without touching the lower run over the entire travel, it is called an unsupported application. The distance between moving end and the beginning of the radius curve of the is called the unsupported length. The unsupported application is the most common. DURAMOV® chains are very well suited for high dynamics and long service life. The maximum unsupported length depends on the fi ll weight and the type of chain or tube. As a result, we differentiate among three types of unsupported length.

▊ Unsupported with straight upper run FLG

The chain is unsupported FLG when the upper run still has camber, is straight or has a maximum sag of 1/2 of the chain link height. Installing the chain in FLG is always recommended. The runs smoothly without additional vibration.

拖链直线架空安装拖链直线架空安装
 The FLG type of installation always generates the longest service life and can be operated with the max. values for speed and acceleration.

Unsupported with permitted sag FLB

The chain is unsupported FLB when the sag is more than 1/2 Chain link height and less than the smallest available radius of this DURAMOV® series. In most applications the can be used unsupported FLB without any problems. There are restrictions concerning the maximum speed and acceleration.

拖链安全塌腰架空安装
 The FLG type of installation always generates the longest service life and can be operated with the max. values for speed and acceleration.

Critical sag

When the sag of the chain is higher than allowed for FLB, it is in critical sag. Using an chain in critical sag should be avoided or solved with special solutions. An chain should never be installed with critical sag. Applications may reach critical sag after long service times. The chain or tube should be replaced in these cases.

拖链危险塌腰架空安装

Vertical, hanging applications

For hanging applications, heights of over 100m are possible with DURAMOV®. Particularly in the area of material fl ow technology, the chain enables a bundled supply of a wide variety of cable types. The use of an chain ensures that individual cables are not entangled in parts of shelves or protruding pallets. We recommend locking mounting brackets for vertical hanging applications.

Cables and hoses

Two important factors in vertical hanging applications are how the cables and hoses lay in the chains and and how they are secured at the end points: all cables and hoses must be hung so that they bear their own weight. The chain the chain fulfi ls the function of orderly conduit bundling only and should not absorb any further tensile forces. The chain interior separation elements should be used for distinct division of all cables and hoses. The cables and hoses must be secured carefully to both end points of the chain. The strain relief must be designed so that the opposite run cannot catch. Safe strain relief and clear separation of the cables and hoses are the basic prerequisites for hanging installations. Cables must be able to move freely and bear their own weight.

Vertical motion with lateral acceleration

If the application has a purely vertical movement without lateral acceleration, a lateral support is not necessary. If lateral acceleration occurs, lateral guidance of the chain must be provided in most cases. The diagram shows the principle of such guidance. Partial guidance is also an option however, it must at least cover the area in which the chain may sway. Lateral acceleration can occur in two directions. The lateral guidance must be installed accordingly. If you have a choice, the layout in fi gure A is preferred. The lateral acceleration then acts transversely to the chain, where it is more stable. When using a guide, an chain with camber should be selected. This ensures that the chain is pressed into the trough.

拖链竖直悬挂安装拖链竖直悬挂安装

Vertical standing applications

Standing applications are standard on many machines and plants. Cables will be guided safely in vertical strokes.

Mounting brackets

The mounting brackets must be attached so that the chain cannot bow outwards. Locking mounting brackets are highly recommended because they can be attached fl ush to the machine.

Cables and hoses

Cables and hoses must be laid in the chain so that they can bend freely and bear their own weight. For precise guidance of the cables and hoses, we strongly recommend interior separation elements. Cables must be strain relieved at both ends.

Lateral acceleration

If lateral acceleration occurs, the chain should, in most cases, be supported along the outer radius. For higher chain heights, it is generally recommended that at least the first three links on the outer radius be supported. For maximum heights and weights, the whole distance must often be supported. Due to the wide variety of combinations involving fi ll weights, stroke heights, chain types and bend radius, we recommend you contact with us. 

拖链垂直-站立应用    拖链垂直-站立应用

Side-mounted Chains

DURAMOV® chains placed on their side can be used unsupported to a limited extent. The turned unsupported length in this case is dependent on the following factors:

 1、Fill weight

 2、Width of the chain

 3、Bend radius

 4、Parallel placement

 We recommend locking mounting brackets for sidemounted applications

侧向安装拖链

The greater the fi ll weight of the chain, the shorter the available unsupported length. When placed on its side, the chain width, in effect, becomes the height. As this height increases, the chain becomes proportionally more stable. If further movement in a second axis is added to the parallel motion of two chains, the unsupported length is impaired. For applications with low fi ll weight, the standard mounting chain is supported brackets are adequate. If, however, the fi ll weight is high and the travels are long, the chain must then be supported either in whole or in part. Due to the variety of application possibilities, we strongly recommend you make use of our consulting services. 

Side-mounted chains are strongly recommended if the installation height is restricted.

 Standard values for unsupported lengths, side-mounted, upon request. The unsupported lengths can be extended by supporting the links next to the mounting brackets.

Distribution rules | Cables and hoses

In order to ensure that the chain is functioning properly and to avoid damage to the cables or hoses, the following principles must be observed when laying cables or hoses:

电缆或者软管在拖链中的布置This minimum clearance would be 10% for electrical round cables, 20% for hydraulic hoses.
电缆或者软管在拖链中的布置In order to reduce the possible friction, avoid pipes with different skin materials such as cables or hoses.(eg: cable and hydraulic hoses)
电缆或者软管在拖链中的布置In applications where multiple cables and hoses are used, in order to avoid mutual friction between them, it is preferable to place them in a suitable separate space and separate them from each other with a spacer. If there are no conditions to achieve, make sure there is enough space between them to avoid mutual friction (H<D).
电缆或者软管在拖链中的布置The cables or hoses are laid in a symmetrical manner according to their diameter and weight. The largest and heaviest cables are placed on the outside of the section and the small and light cables are placed on the inside.

CSB-PCC® Plastic Cable Chains Finder[V1.0] is based on the analysis and calculation of a large number of test data in CSB® laboratory. You can calculations filler and installation data by entering parameters such as cables, gas tubes, oil tubes and installation data, The system will analyze your design data and finally output the adaptation cable chains.
Because the system calculate and analyze based on lab data, it can't exactly meet the ractual use requirements absolutly. The system data verification has certain limitations; CSB® recommends that the cable chains must be tested again to verify whether it meets the actual use requirements.
CSB-PCC® Plastic Cable Chains Finder output data information is only for design reference, and can not be used as the final standard for determining the cable chains conformity, If you have any questions, please contact CSB® sales engineers.

DURAMOV® Plastic Cable Carriers 2023

Type PDF
Size 3.65MB
Time 10-2023
No. CSB/CAT.064
download

6216

+86-400-6633-096

Product News

Customer Services

Fast Services

CSB® More products
CSB-EPB® Plastic plain bearings
CSB-EPB® Plastic plain bearings

CSB-EPB® Plastic plain bearings use high-performance plastics as the raw material, and filled high-strength fibers and special solid lubricants by the polymer compound technology to improve the anti-wear resistance...

more
CSB-LIN® Plastic linear bearings
CSB-LIN® Plastic linear bearings

CSB-LIN® maintenance free plastic linear bearings. Low noise operation is suitable for continuously applications under the extremely dusty environment. It is washable by the clean detergent of the food machine …

more
CSB-BAL® Plastic spherical bearings
CSB-BAL® Plastic spherical bearings

CSB-BAL® plastic spherical bearing for self-aligning solution. The spherical ball is made of wear-resistant composite material and the housing material is made of fiber-reinforced high-strength composite material....

more
CSB-PRB® Plastic ball bearings
CSB-PRB® Plastic ball bearings

CSB-PRB® plastic ball bearings are made of high-performance plastics. The balls are Stainless steel,Glass, Ceramics materials. Perfect self-lubiricating feature and anti-corrosion feature…

more
CSB-LIN® Guide rails & Screw nuts
CSB-LIN® Guide rails & Screw nuts

CSB-LIN® Linear guide rails & Screw nuts designed with the maintenance-free sliding conponents. All sliding parts are made of wear-resistant material CSB-EPB®. resistant to dust, anti-corrosion and low noise.

more
CSB-FWB® Filament-wound bearings
CSB-FWB® Filament-wound bearings

CSB-FWB® backing material is high strength glass fiber with epoxy resin and the lubricating layer is PTFE filament and high strength fiber. The special structure performs an outstanding anti-wear feature and low friction…

more
CSB-SRB® Slewing ring bearings
CSB-SRB® Slewing ring bearings

CSB-SRB® slewing ring bearings are made of self-lubricating materials as the sliding units,Smooth operation and no noise, High-speed operation and long life, Operation temperature ±200℃…

more
CSB-RPM® Steering rack bushings
CSB-RPM® Steering rack bushings

● High elastic feature and stable sliding force
● Longer wearing resistance
● Special design for easy installation

more
DURACHAIN® Escalator rotary chains
DURACHAIN® Escalator rotary chains

CSB-PEC® rotary chains are with self-lubricated plastic bearings EPB15, the plastic bearings provides maintenance-free feature of the chain system and with anti-dust and anti-corrosion features, the chain could...

more
DURARUB® Composite anti-wear pads
DURARUB® Composite anti-wear pads

Excellent anti-wear ability with high strength continious fibers,Max. dynamic load 100MPa,Lower coefficient,Max. operation temperature 130℃;More than 15 thicknesses available...

more
DURAPLAS® Semi-finished products
DURAPLAS® Semi-finished products

DURAPLAS® self-lubricated plastic semi-finished products available service for the customer special requirement of uncommon bearings. It is possible for the mold cost saving and improves the delivery time...

more
CSB® Metal sliding bearings
CSB® Metal sliding bearings

CSB® metal sliding bearings suitable for low-speed and heavy load, intermittent operation and swing condition...

more
CSB® Special design parts
CSB® Special design parts

CSB provide professional design solutions, bearing data verification and test life verification services according to the special requirements of customers...

more
CSB-BAL®M Spherical bearing housings
CSB-BAL®M Spherical bearing housings

CSB-BAL®M spherical bearings for self-aligning solutions. The spherical ball is made of wear-resistant composite material and the housing material is made of stainless steel....

more