DURAPLAS® self-lubricated plastic semi-finished products available service for the customer special requirement of uncommon bearings. It is possible for the mold cost saving and improves the delivery time. The non-standard bearings are available with this flexible solution.
● Save mold costs and short delivery time
● Available for non-standard parts
● Multiple solutions for special requirements
● Continuous working temperature: -40/+90℃
● Maintenance-free, self-lubricated
● Suitable for most application
● Suitable for medium and high load operation
● Continuous working temperature: -100/+80℃
● Maintenance-free, self-lubricated
● Low friction, anti-wear
● Impact resistance, low noise
● Continuous working temperature: -50/+90℃
● Maintenance-free, self-lubricated
● Low friction coefficient
● Long service time
● Continuous working temperature: -40/+80℃
● Maintenance-free, self-lubricated
● Special lubricant and wear resistant
● Low friction coefficient
● Continuous working temperature: -40/+80℃
● Maintenance-free, self-lubricated
● Special lubricant and wear resistant
● Low friction coefficient
● Continuous working temperature: -100/+250℃
● Suitable for high load and lovo speed operation
● High load capacity at higher temperature
● Good chemical resistance
● Continuous working temperature: -40/+80℃
● Maintenance-free, self-lubricated
● Low friction coefficient
● FDA grade
● Continuous working temperature: -40/+90℃
● Maintenance-free, self-lubricated
● Low friction coefficient
● Good wear resistant
● Continuous working temperature: -100/+250℃
● Maintenance-free, self-lubricated
● Good wear resistance with long service life
● Good chemical resistance
● Continuous working temperature: -50/+90℃
● Maintenance-free dry operation
● Small wear off amount against various shaft materials
● Lower friction
● Continuous working temperature: -40/+90℃
● Maintenance-free, self-lubricated
● Low friction coefficient
● Long service time
● Continuous working temperature: -40/+110℃
● Maintenance-free, self-lubricated
● Suitable for operation in dusty environment
● Suitable for working in humid environment
● Continuous working temperature: -40/+110℃
● Maintenance-free dry operation
● Low friction coefficient
● Suitable for working in humid environment
● Continuous working temperature: -50/+90℃
● Maintenance-free dry operation
● Lower friction
● Low water absorption
● Continuous working temperature: -40/+90℃
● Maintenance-free, self-lubricated
● Suitable for most application
● Suitable for medium and high load operation
● Continuous working temperature: -100/+80℃
● Maintenance-free, self-lubricated
● Low friction, anti-wear
● Impact resistance, low noise
● Continuous working temperature: -40/+90℃
● Maintenance-free, self-lubricated
● Impact resistance, low noise
● Excellent dimensional stability
● Continuous working temperature: -100/+250℃
● Maintenance-free, self-lubricated
● Good wear resistance with long service life
● Good chemical resistance
● Continuous working temperature: -40/+80℃
● Maintenance-free, self-lubricated
● Low friction coefficient
● FDA grade
● Continuous working temperature: -50/+90℃
● Maintenance-free dry operation
● Small wear off amount against various shaft materials
● Lower friction
● Continuous working temperature: -40/+90℃
● Maintenance-free, self-lubricated
● Low friction coefficient
● FDA grade
● Continuous working temperature: -40/+110℃
● Maintenance-free, self-lubricated
● Suitable for operation in dusty environment
● Suitable for working in humid environment
● Continuous working temperature: -40/+110℃
● Maintenance-free dry operation
● Low friction coefficient
● Suitable for working in humid environment
4090
▊CSB-SFP® Semi-finished Products Finder[V2.0] is based on the analysis and calculation of a large number of test data in CSB® laboratory. You can calculations material data by entering parameters such as bearing load, speed, and temperature, and finally output material adaptation data.
▊Because the system calculate and analyze based on lab data, it can't exactly meet the ractual use requirements absolutly. The system data verification has certain limitations; CSB® recommends that the products must be tested again to verify whether it meets the actual use requirements.
▊CSB-SFP® Semi-finished Products Finder output data information is only for design reference, and can not be used as the final standard for determining the bearing material conformity, If you have any questions, please contact CSB® sales engineers.
CSB-EPB® Plastic plain bearings use high-performance plastics as the raw material, and filled high-strength fibers and special solid lubricants by the polymer compound technology to improve the anti-wear resistance...
moreCSB-LIN® maintenance free plastic linear bearings. Low noise operation is suitable for continuously applications under the extremely dusty environment. It is washable by the clean detergent of the food machine …
moreCSB-BAL® plastic spherical bearing for self-aligning solution. The spherical ball is made of wear-resistant composite material and the housing material is made of fiber-reinforced high-strength composite material....
moreCSB-PRB® plastic ball bearings are made of high-performance plastics. The balls are Stainless steel,Glass, Ceramics materials. Perfect self-lubiricating feature and anti-corrosion feature…
moreCSB-LIN® Linear guide rails & Screw nuts designed with the maintenance-free sliding conponents. All sliding parts are made of wear-resistant material CSB-EPB®. resistant to dust, anti-corrosion and low noise.
moreCSB-FWB® backing material is high strength glass fiber with epoxy resin and the lubricating layer is PTFE filament and high strength fiber. The special structure performs an outstanding anti-wear feature and low friction…
moreCSB-SRB® slewing ring bearings are made of self-lubricating materials as the sliding units,Smooth operation and no noise, High-speed operation and long life, Operation temperature ±200℃…
more● High elastic feature and stable sliding force
● Longer wearing resistance
● Special design for easy installation
CSB-PEC® rotary chains are with self-lubricated plastic bearings EPB15, the plastic bearings provides maintenance-free feature of the chain system and with anti-dust and anti-corrosion features, the chain could...
moreHigh-performance wear-resistant materials serve as sliding layers combined with high-strength fiber-reinforced load-bearing layers; DURARUB® materials are suitable for applications with consistently high static and ...
moreCSB-BAL®M spherical bearings for self-aligning solutions. The spherical ball is made of wear-resistant composite material and the housing material is made of stainless steel....
more