The standard housings made of stainless steel, The standard spherical balls made of anti-wear material EPB13, available materials: EPB10 for 250℃ high temperature applications
● Maintenance-free dry operation
● Dirt-resistant and no noise
● Compensation of misalignment errors
● Compensation of edge loads
● High load
● High load spherical ball solutions
● Standard ball material EPB13
● Avaliable FDA grade material EPB6 or 250℃ material EPB10
● UC204 up to UC208
● Standard anti-wear composite EPB13 balls
● Available materials: FDA grade material EPB6 or 250℃ material EPB10
● UC204 up to UC208
● Standard anti-wear composite EPB13 balls
● Available materials: FDA grade material EPB6 or 250℃ material EPB10
● UC204 up to UC208
● Standard anti-wear composite EPB13 balls
● Available materials: FDA grade material EPB6 or 250℃ material EPB10
● UC204 up to UC208
● Standard anti-wear composite EPB13 balls
● Available materials: FDA grade material EPB6 or 250℃ material EPB10
● Dimension range:20mm,25mm,30mm
● Standard material: Galvanized steel, available material: stainless steel and aluminum alloy
● Used with spherical bearings
In standard spherical ball is made from EPB13 material, which is known for its high strength and low coefficient of friction while running dry. This is especially important for low loads and very slow movements. Further to the standard material EPB13, spherical balls are available material EPB10 for high temperature operation at 250℃.
Standard housings made from stainless steel for high load and extremely shock resistant.
The load capacity of the maintenance-free spherical bearing is very high at normal ambient temperatures. The excellent dampening properties are based on the fact that the polymer material of the spherical balls can absorb vibrations differently than steel. The load capacity of the bearings should therefore be checked in a practical test, particularly if it will be used under continuous high loads and at elevated temperatures.
The shaft sliding in the spherical ball of the spherical bearing in normal operation, There is slightly sliding between the ball and the housing; The spherical ball made from EPB13, Lower friction and permits high speeds when running dry.
The bore of CSB-BAL®M spherical ball is produced to a standard tolerance E10. Shafts should also meet recommended tolerances h6 to h9. The inner diameter with plug gauge to check but not caliper. Please contact us in case you require lower or other bearing tolerances.
496
● Maintenance-free and dry operation
● Resistant to dust and dirt
● Absolute corrosion resistance
● Compensation of misalignment errors
● Maintenance-free and dry operation
● Resistant to dust and dirt
● Absolute corrosion resistance
● Compensation of misalignment errors
● Maintenance-free and dry operation
● Resistant to dust and dirt
● High radial loads and compensation of edge loads
● Compensation of misalignment errors
● Maintenance-free and dry operation
● Resistant to dust and dirt
● High radial loads and compensation of edge loads
● Compensation of misalignment errors