C11 micro cable carriers are very small, one piece and open design chains with low weight, making them ideal for highly dynamic applications and cables filled quickly. C11 micro cable carriers are optimal for the smallest installation spaces, and are available in many versions.
● Small pitch for low-noise, smooth running
● One-piece design, non-openable
● Very lightweight, low price smallest inner heights and bend radius
● Inner height:5 mm
● Inner width:5-10 mm
● Bend radius:10-18 mm
● Link pitch:10 mm
● Inner height:7 mm
● Inner width:7-30 mm
● Bend radius:15-48 mm
● Link pitch:16.7 mm
● Inner height:10 mm
● Inner width:10-20 mm
● Bend radius:18-38 mm
● Link pitch:20 mm
C11 micro cable carriers are very small, one piece and
open design chains with low weight, making them ideal
for highly dynamic applications and cables filled quickly.
C11 micro cable carriers are optimal for the smallest
installation spaces, and are available in many versions.
Open design, easy to fill cables
Flammability Class UL94 V2
CE certification
RoHS certification
Low-noise
Electrically conductive ESD/ATEX version C11E upon request
Micro cable carriers, open designand cable filled quickly | Part No. | Inner width Bi [mm] | Outer width Ba [mm] | Inner height Hi [mm] | Outer height Ha [mm] | Bend radius R [mm] | Unsupported length [m] |
C11.05 | 5-10 | 8.7-13.7 | 5 | 8 | 10-18 | ≤0.3 | |
C11.07 | 7-30 | 12-35 | 7 | 10 | 15-48 | ≤0.5 | |
C11.10 | 10-20 | 16.5-26.5 | 10 | 15 | 18-38 | ≤0.5 |
Twist and click Press in cable Twist and divide
In order to ensure that the chain is functioning properly and to avoid damage to the cables or hoses, the following principles must be observed when laying cables or hoses:
▊ This minimum clearance would be 10% for electrical round cables, 20% for hydraulic hoses. | |
▊ In order to reduce the possible friction, avoid pipes with different skin materials such as cables or hoses.(eg: cable and hydraulic hoses) | |
▊ In applications where multiple cables and hoses are used, in order to avoid mutual friction between them, it is preferable to place them in a suitable separate space and separate them from each other with a spacer. If there are no conditions to achieve, make sure there is enough space between them to avoid mutual friction (H<D). | |
▊ The cables or hoses are laid in a symmetrical manner according to their diameter and weight. The largest and heaviest cables are placed on the outside of the section and the small and light cables are placed on the inside. |
526
● General machinery
● Cleanroom applications
● Electronic apparatus
● Office equipment
● Vending machines
● Measuring equipment
● Packaging machines
● Medical industries
CSB conducts approximately 10 million DURAMOV® cable chain endurance tests at 68 laboratory stations and more than 30 application stations every year. The cable chain test laboratory includes different installation and application tests: short-stroke unsupported installation, vertical hanging, vertical standing, side-mounted and long-stroke sliding tests in outdoor natural climates; The cable chain application station tests include: Application tests of C02 cable chains on machining centers, Application tests of C02 and C06 cable chains on grabbing manipulators or robots, Application tests of C03 cable chains on long-stroke manipulators, Application tests of micro cable chains such as C01 and C31 on high-frequency motion devices...
▊DURAMOV® Cable Chain Finder[V1.1] is based on the analysis and calculation of a large number of test data in CSB® laboratory. You can calculations filler and installation data by entering parameters such as cables, gas tubes, oil tubes and installation data, The system will analyze your design data and finally output the adaptation cable chains.
▊Because the system calculate and analyze based on lab data, it can't exactly meet the ractual use requirements absolutly. The system data verification has certain limitations; CSB® recommends that the cable chains must be tested again to verify whether it meets the actual use requirements.
▊DURAMOV® Cable Chain Finder output data information is only for design reference, and can not be used as the final standard for determining the cable chains conformity, If you have any questions, please contact CSB® sales engineers.
▊FLEXMOV® High-flexible Cable Finder V1.0 is based on a large amount of test data from CSB® laboratories and combined analysis and calculation of cable materials and structural characteristics. You can find suitable cables by selecting sheath materials, cable application parameters and application environment options, and combined with the cable core wire and shielding requirements, the system will output an adapted flexible cable.
▊Since the system's simulation calculation analysis based on theoretical data may not fully meet the input parameters, data verification has certain limitations; CSB® recommends that flexible cables need to be tested and verified again on the equipment to fully meet the actual use requirements.
▊The output data information of the FLEXMOV® high-flexible cable finder is only for reference in design selection and cannot be used as the basis for final cable compliance determination; if you have any questions, please contact CSB® sales engineers.
High flexible cables are designed for highly bending and continuous motion applications and used for cable chains, robots, auto-drive systems, etc ...
more● Small pitch for low-noise, smooth running
● One-piece design, non-openable
● Very lightweight, low price smallest inner heights and bend radius
more● Small pitch for low-noise, smooth running
● Two-pieces design, openable along the outer radius
● Very lightweight, low price smallest inner heights and bend radius
more● Electro-Static discharge, urface resistance <109Ω
● Small pitch for low-noise, smooth running
● One-piece design, non-openable
more● Electro-Static discharge,Surface resistance <109Ω
● Small pitch for low-noise, smooth running
● Two-pieces design, openable along the outer radius
more● Small pitch for low-noise, smooth running
● Two-pieces design, Openable along the outer radius or inner radius
● Quick flange optional
more● Small pitch for low-noise, smooth running
● Two-pieces design, Openable along the outer radius or inner radius
● Quick flange optional
more