CSB塑料轴承产品
banner
banner
banner
CSB塑料轴承产品05
CSB塑料轴承产品04
WRU01 Round rail sliding blocks, MN2

Product properties

● MN2 liners for aluminum shafts 

● Maintenance-free, dry-running

● Fast assembly and light weight

● For WR single and dual guide rails

● Resistant dust

● Silent operation



WRU01 Round rail sliding blocks, MN2
Dimensions

LMS-WRU01 Round rail sliding blocks load capacity

Part No.

Static load [N]
Weight
Coy-
Coz+
Coz-
[g]
WRU01-10-MN2
1200120025020
WRU01-10-MN2-FL
1200120025020
WRU01-16-MN2
2100210040048
WRU01-16-MN2-FL
2100210040048
WRU01-20-MN2
3200320050099
WRU01-20-MN2-FL
3200320050099

Eccentric forces

● Maximum 2:1 ratio

● 1x = bearing separation on same shaft 

● 2x = distance from shaft to load or force

CSB-LIN®直线轴承安装法则

● CAUTION: uneven motion or even system blockage will occur if the 2:1 ratio is exceeded !

This principle is NOT load dependent! It is NOT due to edge loading. It is also NOT dependent on the driving force used! The greater the distance between the drive and guide bearings, the higher the degree of wear and required drive force.

There may be other factors that add to the braking effect, but the coefficient of friction is the main cause.

● NOTE: The Rule(2:1) is based on the static friction value of 0.25 theoretically, However, Additional lubrication can help to drop friction and extend the 2:1 ratio.

● If you have any questions on design and/or assembly, please contact our application engineers.


WR01 Single round linear guide rails
WR01 Single round linear guide rails

● Single guide rails made of aluminum

● Hard anodized surface

● Weight saving and no noise

● Variable width can be fitted

more
WR02 Double round linear guide rails
WR02 Double round linear guide rails

● Dual guide rails made of aluminum

● Hard anodized surface

● Weight saving and no noise

● Standard fitting width

more

CSB-LIN® Plastic Linear Bearings Finder[V2.0] including LIN plastic linear bearings and LINP precision linear bearings. The system is based on the analysis and calculation of a large number of test data in CSB® laboratory. You can calculations bearing data by entering parameters such as bearing load, speed, temperature and position information, The system will output bearing adaptation data and min. driving force.
Because the system calculate and analyze based on lab data, it can't exactly meet the ractual use requirements absolutly. The system data verification has certain limitations; CSB® recommends that the bearing must be tested again to verify whether it meets the actual use requirements.
CSB-LIN® Plastic Linear Bearings Finder output data information is only for design reference, and can not be used as the final standard for determining the bearing material conformity, If you have any questions, please contact CSB® sales engineers.

CSB-LMS®WRU01 Round rail sliding blocks-MN2

Type PDF
Size 86.9KB
Time 09-2021
No. CSB/CAT.052
download

453

+86-400-6633-096

Product News

Customer Services

Fast Services

CSB® More products
WR01 Single round linear guide rails
WR01 Single round linear guide rails

● Single guide rails made of aluminum

● Hard anodized surface

● Weight saving and no noise

● Variable width can be fitted

more
WR02 Double round linear guide rails
WR02 Double round linear guide rails

● Dual guide rails made of aluminum

● Hard anodized surface

● Weight saving and no noise

● Standard fitting width

more
WRU01 Round rail sliding blocks
WRU01 Round rail sliding blocks

● Fitted standard liners EPB13 

● Maintenance-free, dry-running

● Fast assembly and light weight

more
WRC01 Round guide rail carriages
WRC01 Round guide rail carriages

● Fitted standard liners EPB13 

● Maintenance-free, dry-running

● Fast assembly and light weight

more
WRU01 Round rail sliding blocks, Long design
WRU01 Round rail sliding blocks, Long design

● Assembled 2pcs standard liners EPB13

● Carrying capacity is twice that of the standard type

● Maintenance-free, dry-running

more
WRU01 Round rail sliding blocks, TPB
WRU01 Round rail sliding blocks, TPB

● Wear layer material: TEFPLAS® B 

● Operation temperature ±200℃

● Max. continuous running speed 1.5m/s

● Fast assembly and light weight

more
WRC01 Round guide rail carriages,MN2
WRC01 Round guide rail carriages,MN2

● MN2 liners for aluminum shafts 

● Maintenance-free, dry-running

● Fast assembly and light weight

more
WRC01 Round guide rail carriages,TPB
WRC01 Round guide rail carriages,TPB

● Wear layer material: TEFPLAS® B 

● Operation temperature ±200℃

● Max. continuous running speed 1.5m/s

more
WRU01 Stainless steel guide rail sliding blocks
WRU01 Stainless steel guide rail sliding blocks

● Fitted standard liners EPB13 

● Housing made of stainless steel 316Ti

● Good corrosion resistance

● For WR ES single and dual guide rails

more